Enmet EX-2000 Bedienungsanleitung PDF herunterladen (Seite 7)

EX2000 ENMET Corporation

2.0

2.0 2.0

2.0 EX-2000

EX-2000 EX-2000

EX-2000 Features

FeaturesFeatures

Features

See figure 1 for location of features listed below.

Feature Description

Display The Liquid Crystal Display(LCD) allows messages to be read clearly:

• 4 digits (7 segments), for displaying the measurement

• 3 digits (14 segments), for displaying symbols such as: LEL, MIN, MAX, TST,

OFF, CH4 etc …

• 3 arrowhead symbols to indicate the parameter scrolling menu is used to

indicate: Up, Down and Negative indicators

• 4 pictograms supplementing the audio and visual alarms relating to the

exceeding of thresholds, battery faults, maintenance mode etc…

• Equipped with backlight by Light-Emitting Diodes (LED)

ENTER Switch

Red oval pushbutton switch on the front of the EX-2000, below the display.

• Switching the instrument on or off

• Enter, confirmation

BACKLIGHT / MINUS

Switch

Round w/down pointing triangle pushbutton switch on the front of the EX-2000.

• Backlighting the display

• Scrolling the parameters and menus

• “Minus ” switch, during programming or calibration

• confirmation of "yes" or "no", during programming or calibration

ALARM / PLUS

Switch

Round w/up pointing triangle pushbutton switch on the front of the EX-2000.

• Clears the gas alarms

• “Plus” switch, during programming or calibration

Visual Alarm Red indicator clearly visible on 3 sides and located at the top of the instrument

Audio Alarm Loud buzzer located on the front panel of the instrument

Sensor

Located under the sensor cover on the top of the EX-2000

• The target gas will be labeled on the left side of the EX-2000

Belt Clip Clip to outside of clothing for hands-free operation

Programming / Charge

Port

Located at the left side of the EX-2000 under an attached cover.

• To plug-in battery charger

• To plug-in programming plug

Programming Plug

Used to access the Programming and Calibration Menus for Maintenance

2.1 Power supply

The EX-2000 is powered by 3 batteries either alkaline or optional rechargeable.

• The 3 AA alkaline will last 12 hours when used under normal conditions. When replaced they must be replaced with

Duracell MN 1500

• The 3 optional cadmium-nickel rechargeable will last 30 hours when used under normal conditions. When replaced they must

be replaced with Panasonic P80 AA, 1V2/800 mAH

ARNING

: Substitution of batteries or other components may compromise the intrinsic safety of the

instrument.

1 2 3 4 5 6 7 8 9 10 11 12 ... 19 20

Kommentare zu diesen Handbüchern

Keine Kommentare

Enmet EX-2000 Bedienungsanleitung Seite 7

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Messgeräte Enmet EX-2000