Enmet SDS-97D Bedienungsanleitung

ENMET Corporation PO Box 979 Ann Arbor, MI 48106-0979 Manual Part Number 80003-034 MCN-443, 01/21/11 SDS – 97D Senso

SDS – 97D Sensor / Transmitter ENMET Corporation 8 3.0 Programmer If the SDS-97D sensor/transmitter is supplied with the communication port optio

SDS – 97D Sensor / Transmitter ENMET Corporation 9 5.0 Warranty ENMET warrants new instruments to be free from defects in workmanship and materia

PO Box 979 680 Fairfield Court Ann Arbor, Michigan 48106-0979 734.761.1270 Fax 734.761.3220 Returning an Instrument for Repair ENMET instrumen

Repair Return Form Mailing Address: ENMET Corporation PO Box 979 Ann Arbor, Michigan 48106 Phone Number: 734.761.1270 FAX Number: 734.76

Table of Contents 1.0 INTRODUCTION ...

SDS – 97D Sensor / Transmitter ENMET Corporation 1 1.0 Introduction ♦ Each sensor/transmitter consists of an electrochemical gas detection senso

SDS – 97D Sensor / Transmitter ENMET Corporation 2 2.0 Sensor / Transmitter 2.1 Features See figure A for location of features for both styles of

SDS – 97D Sensor / Transmitter ENMET Corporation 3 2.2 Installation • The interior of a sensor/transmitter with the cover removed is shown in the

SDS – 97D Sensor / Transmitter ENMET Corporation 4 2.2.2 Sensor/Transmitter with ISB Installation with a recommended Intrinsic Safety Barrier pro

SDS – 97D Sensor / Transmitter ENMET Corporation 5 If the sensor/transmitter enclosure is grounded, connect the shield at the control. The termi

SDS – 97D Sensor / Transmitter ENMET Corporation 6 2.3 Calibration CAUTION: Sensor/transmitters must be calibrated with the stipulated calibratio

SDS – 97D Sensor / Transmitter ENMET Corporation 7 2.3.1 Automatic Zeroing OXYGEN S/T: Oxygen S/T, 0 – 30% by volume, do not require the automati