Enmet RECON-4 Bedienungsanleitung Seite 1

ENMET Corporation PO Box 979 Ann Arbor, MI 48106-0979 www.enmet.com Manual Part Number 80006-034 January, 2011 RECO

8 3.6 Data Print: Click the icon for “Data Print” to print out the data logs and event logs. 3.7 Delete History Data: 3.7.1 Click the icon for

9 3.8 Modify Parameters: Click the icon for “Modify Parameters” to open the window for modification of parameters. There are two parts of the “Modi

10 3.8.1.3 Modify Profiles: Check the “Profiles” box, select the alarm type that you prefer in the drop down menu, and then click Setup. 3.8.1.4 Mo

11 3.8.2 Modify Parameter of each sensor channel: The user can modify the calibration gas concentration, low alarm level and high alarm level of each

12 3.8.2.3 Channel 3— Carbon monoxide (CO) The Adjusting Concentration of the channel of CO can only be between 200.0 and 800.0 ppm. The Low alarm

13 NOTE FOR SECTIONS 3.9: The following sections 3.9, 3.9.1 and 3.9.2 describe advanced features of the RECON/4 which are currently under developmen

14 d. Select and open the calibration data file provided by the manufacturer. e. The calibration data will then be input into the RECON-4. f. Once

15 c. Select the location that you want to save the calibration data file. e. Then the calibration data will be transferred successfully.

1 Brief Introduction The RECON-4 Portable Multi-gas Detector Software is required for data management and reconfiguring of the RECON-4 portable mult

2 1.5 The shortcut is installed for the current user by default, and if you want to install a shortcut for all users, please select the second option

3 3. Using Portable Multi-gas Detector Software The software is used to: a. Set the user options b. Download data logs and event logs c. Data check

4 After downloading all the data logs and event logs to the computer successfully, it will show an indication window as follows: If there is no dat

5 3.3.2 Review data history by Date: Check the “Date” box, and then below it select the date range that you want to review. Then click, Review to dis

6 3.3.4 Review data history by Record Type: Check the “Record Type” box, and then below it in the drop down menu select the record type that you want

7 3.5 Output to Excel: Click the icon for “Output to Excel” to output the data to an Excel file. If there is no data to output to excel fi